1100 partial arc equipment

The roller table forming part of the 1100 type partial arc equipment is driven by a motor, and the chain drives each roller to rotate. In the pressing part, a hydraulic cylinder drives the mold to move up and down, which can press the colored steel into many sections, shaped like glazed tiles. The cutting knife part of the 1100 type arc glazed tile machine is driven by a hydraulic cylinder to move up and down, which can cut off colored steel tiles.

The antique glazed tiles rolled by the 1100 type partial arc equipment and die-formed have the characteristics of beautiful appearance, simple and elegant, unique shape, taste, etc., and can be widely used in garden-style factories, tourist attractions, pavilions, hotels, villas, exhibitions Buildings and outdoor decorations such as hotels, resorts, homes, etc.

The 1100 type partial arc equipment is divided into three parts, the roller forming part, the pressing part and the cutter part.

The production process of the 1100 type partial arc equipment is as follows: the colored steel plate enters the roller forming part, and then goes to the pressing part after forming, where it is pressed into equidistant sections, and the cutter is responsible for cutting to a fixed length.

The products produced by the 1100 type eccentric arc equipment have the characteristics of light weight, heavy load bearing and excellent performance. The 1100 type eccentric arc equipment is widely used in the multi-high-rise steel structure construction industry.

Technical parameters of type 1100 partial arc equipment:

1. Equipment installation dimensions: 6000mm×15500mm×1200mm

2. Total weight of equipment: about 5500kg

3. Forming passes: 12 passes

4. Feeding width: 1250mm

5. Feeding thickness: 0.2-0.8mm

6. Electronic control system: Industrial computer PLC frequency conversion control for the entire machine.

7. Host power: 3kw, hydraulic shearing power: 3kw

8. Working speed: 2000mm-3500mm/min

9. Hydraulic station pressure: 10-12Mpa

Before using the 1100 type eccentric arc equipment, check whether all connections are secure and whether the mounting bolts and nuts are tightened. Enough lubricating oil should be added to the left and right chassis before the machine can be powered on and started for test run. First, run the machine empty and observe carefully to see if there is any vibration. , noise, whether there is oil coming from the oil window, whether the movement of each component is coordinated, and the mold can be installed only after the diversity is normal. When installing the mold, you need to cut off the power supply, move the motor belt or large gear manually, index the workbench, and make the slide seat When it rises to a high point, it is best to use an object to support it between the workbench and the bottom of the sliding seat, so that the sliding seat will naturally fall, causing an accident.

The mold used in this machine requires an upper mold and six lower molds of the same size. Install the upper mold and a lower mold first. The lower mold is directly installed on the hexagonal runner worktable, and the upper mold is installed on the bottom of the slide. Place a backing plate of appropriate thickness to protect the upper and lower molds. After the molds are closed, the surrounding gaps will be even and the distance between the upper and lower molds will be equal to the required thickness of the tile blank. Then take the upper mold as the standard, turn the workbench, and install the remaining five sets of lower molds. Only after the upper and lower molds are installed can the car be driven for tile pressing.