Glazed tile equipment

The glazed tile equipment is divided into three parts, the roller forming part, the pressing part and the cutter part. The roller forming part of the glazed tile press is driven by a motor, and the chain drives each roller to rotate. The pressing part of the glazed tile equipment is a hydraulic cylinder that drives the mold to move up and down, which can press the colored steel into many sections, shaped like glazed tiles.

The cutter part of the glazed tile equipment is a hydraulic cylinder that drives the cutter to move up and down, which can cut off the colored steel tiles. The production process of the glazed tile press machine is as follows: the colored steel plate enters the roller forming part, and after being formed, it goes to the pressing part and is pressed into equidistant sections, and the cutter is responsible for cutting to a fixed length. Introduction to the control of glazed tile equipment The execution part includes a frequency converter drive motor, a hydraulic station motor, two hydraulic solenoid valves for pressing, and two hydraulic solenoid valves for the cutter.

The testing parts of the glazed tile equipment include: pulse encoder for detecting the length of colored steel tiles, up and down travel switches for pressing, up and down travel switches for the cutter, up and down operation buttons for pressing, up and down travel buttons for the cutter, emergency stop switch, hydraulic start Stop switch and so on. The glazed tile equipment PLC uses KDN-K306-24AR of the KDN-K3 series. The glazed tile press has 14 inputs/10 relay outputs, which just meets the input and output requirements. Equipped with KDN text screen, parameter setting, alarm display, help information, production data display, etc. can be completed.

Glazed tile equipment requires high-digital pulse input function. KDN-K306-24AR has excellent high-digital input performance, and the AB phase has good anti-interference ability. And use the fixed value interrupt function to determine the accuracy. The tile press has many parameters to be set, which can be set using the text screen. There are two types of glazed tile equipment parameter settings: equipment parameters and user parameter settings. Equipment parameters include: single pulse length, overshoot, pressing distance, pressing time, cutting time, etc. The user parameters of the glazed tile press include: number of sheets, length, first section, last section, pitch, number of sections, etc. The glazed tile press control system can also complete the veneer cutting function.