Double Layer Roll Forming Machine

Technical parameters of Double Layer Roll Forming Machine:

Overall dimensions: 5700mm×1500mm×1500mm

Forming method: roll forming (pre-pressed forming)

Number of forming rows: V900 rollers with 10 rows for pre-forming, V840 rollers with 11 rows for pre-forming

Feeding width: 1000mm

Rolled plate thickness: <0.6mm

Equipment shaft diameter: Φ70mm

Host power: 3KW

Rolling speed: 10m-12m/min

Machine weight: about 3000kg

Pumping station motor: 3KW

Equipment frame: 300H steel

Scissor material: Cr12 (chromium 12)

Equipment transmission: sprocket, chain

The equipment frame is all welded with 250# I-beam steel.

Middle plate thickness: 14mm

Fully automatic computer fixed-length cutting system

Double Layer Roll Forming Machine combines two models very well, with reasonable structure and beautiful appearance. It has the characteristics of saving space and simple operation, and is especially suitable for customers with small sites and on-site construction.

Double Layer Roll Forming Machine is mainly composed of a feed introduction platform, a forming host, a forming and shearing device, a hydraulic station, and a computer control system. The operation of switching between upper and lower floors is simple. You only need to use the conversion button on the electric control cabinet to control each floor separately. The power can also be controlled through the clutch to control each floor separately. Optional configurations include ordinary unloading machine and hydraulic unloading machine. The models of the upper and lower floors are determined according to customer requirements.